When you change the battery using the "Social Booth" program you will need to exit the program before doing so. If you disconnect the camera when the program is open, it will say there is not DLSR connected even though there is. 



You should be able to restart just the program to resolve this issue. 


If the camera is disconnected or the battery dies when the program is open your camera settings will lock and you will need to unlock them by:


If your camera settings are locked you can unlock them by:



  1. Exit the program
  2. Unplug the Camera cable
  3. Set the DSLR to "Manual Mode" (if already on manual change it to something else then back to manual)
  4. turn off the camera
  5. Open the Program
  6. Plug back in the camera
  7. Turn on DSLR Camera
  8. Select the DSLR and select the "Configure Button" (looks like a square with an arrow coming out of it)
  9. Change the Fstop to 5.6
  10. Close the Configure window
  11. reopen the configure window
  12. Change to your desired settings




TV/Shutter Speed: This value affects how much light is let into the camera. The lower this number the brighter photos will be, the higher the number the darker the pictures are.

AV/FStop: This value should be left at 5.6.

ISO: This value is overall brightness. Only change this number after changing the TV value.

 

For "Indoor/Low light"

  1. TV/Shutter Speed=1/125
  2. AV/FStop= 5.6
  3. ISO= 800 - 1600
If your photos are too bright "washed out), lower your ISO. If too dark increase the ISO. 

 

For "outdoor/bright"

  1. TV= 1/125 - 1/200
  2. AV/FStop=5.6
  3. ISO=100 - 400
If your photos are too bright "washed out), lower your ISO. If too dark increase the ISO. 

 







If there is anything else we can assist with, please don't hesitate to let us know.